MAF Sensor Question
Thread Starter
Teching In
Joined: Oct 2011
Posts: 1
Likes: 0
From: Minnesota
MAF Sensor Question Im doing a LS swap into my second gen camaro and I recently came into a CAI kit for a 01 Silverado for cheap. My issue is that the MAF sensor that I have, from a 02 camaro, is not the same diameter as the MAF sensor for the trucks. (about 1/8 in. difference) I was wondering, since the truck sensor is larger, is able to flow more, and has the IAT built into it.
Could I use the truck MAF and wire in the MAF and IAT wires into the connector for the truck MAF and use that?
Could I use the truck MAF and wire in the MAF and IAT wires into the connector for the truck MAF and use that?
I don't see why not, I run a 5-wire MAF with the IAT wires cut and run to an F-body IAT. The trucks just have both sensors in on housing for simplicity's sake.
I'd recommend keeping the IAT separate. My 5 wire heat soaked quite badly and threw off my IAT readings by about 30 degrees.
I'd recommend keeping the IAT separate. My 5 wire heat soaked quite badly and threw off my IAT readings by about 30 degrees.
