LQ4 oxygen sensor plug
11-09-2011, 10:17 PM
#1
Teching In
Thread Starter
Join Date: Sep 2011
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
LQ4 oxygen sensor plug The bone head that sold me the motor cut off the oxygen sensor wires! I have tryed searching for what the plug looks like but i cant seem to find the correct one.
Can someone please post a picture of how they look or where I can buy the correct ones?
The engine is an LQ4 with a RED/BLUE harness.
Can someone please post a picture of how they look or where I can buy the correct ones?
The engine is an LQ4 with a RED/BLUE harness.
11-10-2011, 07:04 AM
#2
It is either 4 wire flat or 4 wire square black.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
11-10-2011, 09:37 AM
#3
Many of the Auto parts story should have a catalog of the connectors/pigtails. Or your local GM Dealer.
There are a few sponsor / vendor that could sell you one. other option is to go to one of the local Junk Yards and buy a used one.
I know CurrentPerformance, CaspersElectronics or EFIConnection are a few that I have either used or browsed for pigtails.
BC
There are a few sponsor / vendor that could sell you one. other option is to go to one of the local Junk Yards and buy a used one.
I know CurrentPerformance, CaspersElectronics or EFIConnection are a few that I have either used or browsed for pigtails.
BC
