LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Conversions & Swaps
Flywheel Issues?

Conversions & Swaps LSX Engines in Non-LSX Vehicles

Sponsored by:

Flywheel Issues?

Reply Subscribe

Search this Thread

Old

Dec 28, 2011 | 06:44 AM

#1

Thread Starter

TECH Fanatic

Joined: Oct 2011

Posts: 1,356

Likes: 2

From: Felton Pa

Default

Flywheel Issues?

I have an '03 4.8L engine to put in my Chevelle with a 700r4. I found on this web site somewhere that the flexplate to use is GM part# 12551367. The truck flexplate that is currently on the engine has an offset that will be closer to the converter than the conversion flexplate is FLAT. Any thoughts or insight on this issue would be helpful.

Attached Thumbnails

Flywheel Issues?-dscn1056-copy.jpg

Flywheel Issues?-dscn1057-copy.jpg

Last edited by 99VetteFRC; Dec 28, 2011 at 12:29 PM.

Old

Dec 28, 2011 | 08:15 PM

#2

Staging Lane

iTrader: (1)

Joined: Aug 2008

Posts: 59

Likes: 0

From: central michigan

Default

i think that flat plate is meant to be used with a crankshaft spacer and a 4L80E trans.

Old

Dec 28, 2011 | 08:37 PM

#3

Thread Starter

TECH Fanatic

Joined: Oct 2011

Posts: 1,356

Likes: 2

From: Felton Pa

Default

Well the truck flexplate that is on the engine is about 3/8 inch further from the block than the one I got for Chrismas. I am putting my 700r4 behind the 4.8 so I hope it all fits ok.

Reply Subscribe

12551367, 48, 4l80e, 700r4, attached, converter, flywheel, gm, part

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 11:57 PM.