70 stepside 6.0 swap
Thread Starter
Teching In
Joined: Sep 2008
Posts: 10
Likes: 0
From: Lansing,mi
70 stepside 6.0 swap Well, truck is getting closer to done and thought I would make a small build thread that might help someone out.
What it is: 1970 chevy c10, motor is out of a 2004 hummer, trans is out of 2005 half ton truck, fuel cell, drive by wire,auto meter gauges and used mp112.
This is to be a build on the cheap. I am using parts from eBay, craigslist and junkyard parts. I am only getting new parts when I can't find cheap ones.
Hope this helps someone or is good for a laugh.
What it is: 1970 chevy c10, motor is out of a 2004 hummer, trans is out of 2005 half ton truck, fuel cell, drive by wire,auto meter gauges and used mp112.
This is to be a build on the cheap. I am using parts from eBay, craigslist and junkyard parts. I am only getting new parts when I can't find cheap ones.
Hope this helps someone or is good for a laugh.
Thread Starter
Teching In
Joined: Sep 2008
Posts: 10
Likes: 0
From: Lansing,mi
Not sure if this will work but here is the video of the fist time starting it up. The power is from a light switch I wired up and the drive by wire padel is hooked to the core suport with a clamp.
http://www.facebook.com/video/video....07368165940981
http://www.facebook.com/video/video....07368165940981
But here is what she looks like now that it is back on the road. 
