Brake boster
Just so you can see what in dealing with here ya go. From left to right... 91 corvette , 99 Camaro, Generic from parts store. I feel like an idiot.. I cant believe this is such a hard part to find. To top it off I dropped the bushing for the Camaro in the booster.
Trending Topics
I finally found a solution, Help! part # 42054 and stock LS1 Camaro check valve. It's listed a s a PCV grommet it fits very tight but it fits. The inside diameter is a little off I had to use a drill bit on it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
i came accross the same problem today. i just went to lowe's and got a reduction fitting. if you stay with the 1/2 inch line then it's also more difficult to find T fittings, it seems like they are all for 3/8 hose. i have to tie in my boost guage and proflow valve.
i came accross the same problem today. i just went to lowe's and got a reduction fitting. if you stay with the 1/2 inch line then it's also more difficult to find T fittings, it seems like they are all for 3/8 hose. i have to tie in my boost guage and proflow valve.
