Fox Mustang Dingo mounts?
Thread Starter
Teching In
Joined: Jun 2010
Posts: 14
Likes: 0
From: Jacksonville, FL
Fox Mustang Dingo mounts? Yes I've searched... no luck.
anyone use these?
http://dirtydingo.com/store/product_...oducts_id=1375
1) Will these work for a fox k member if i use 4.6 mounts?
2) I like the adjustability to move the engine back, but also a little afraid of the adjustability and engine vibration possible working the bolts loose.
3) I already have an aftermarket k-member for 5.0, don't really want to spend more money for the AJE LS1 unit.
anyone use these?
http://dirtydingo.com/store/product_...oducts_id=1375
1) Will these work for a fox k member if i use 4.6 mounts?
2) I like the adjustability to move the engine back, but also a little afraid of the adjustability and engine vibration possible working the bolts loose.
3) I already have an aftermarket k-member for 5.0, don't really want to spend more money for the AJE LS1 unit.
TECH Resident
Joined: Aug 2002
Posts: 909
Likes: 2
From: La.
Yes I've searched... no luck.
anyone use these?
http://dirtydingo.com/store/product_...oducts_id=1375
1) Will these work for a fox k member if i use 4.6 mounts?
2) I like the adjustability to move the engine back, but also a little afraid of the adjustability and engine vibration possible working the bolts loose.
3) I already have an aftermarket k-member for 5.0, don't really want to spend more money for the AJE LS1 unit.
anyone use these?
http://dirtydingo.com/store/product_...oducts_id=1375
1) Will these work for a fox k member if i use 4.6 mounts?
2) I like the adjustability to move the engine back, but also a little afraid of the adjustability and engine vibration possible working the bolts loose.
3) I already have an aftermarket k-member for 5.0, don't really want to spend more money for the AJE LS1 unit.
Thread Starter
Teching In
Joined: Jun 2010
Posts: 14
Likes: 0
From: Jacksonville, FL
i don't have the patience to make my own, then lower the motor in the car to have it not work. been there done that, don't mind doing a little fabricating, but not for something that should be engineered properly.
i'll gladly pay $100-$150 for something that's proven.
i'll gladly pay $100-$150 for something that's proven.
Staging Lane
Joined: Apr 2010
Posts: 60
Likes: 0
The Fox 5.0/4cyl K member is different then the 4.6 K member. so bolting 4.6 mounts to the 5.0 K member will not work.
I say sell the aftermarket K member and buy a AJE K member and LS1 mounts. You'll know it will work with no hassles.
I say sell the aftermarket K member and buy a AJE K member and LS1 mounts. You'll know it will work with no hassles.
