Which Tanks Inc Pump and lines?
#1
Which Tanks Inc Pump and lines?
I want to purchase the Tanks Inc kit for my 72 Cutlass what's going to get a LS1 with a bigger cam. Do I need the High Flow 250 Liter Per Hour Pump for my LS1 or the Deluxe 190 Liter Per Hour Pump? I shouldn't need the higher 400 LPH pump since I'm not going to make 500+ HP. I hope to be close to 400 but I don't know.
I read that 3/8" or -06 AN is ok up to 375 hp. Will I be ok with this size or do I need to go up a size? I think I am going to run a hard line front to back enless there is a better nylon high pressure fuel line that other people have had good success with.
I read that 3/8" or -06 AN is ok up to 375 hp. Will I be ok with this size or do I need to go up a size? I think I am going to run a hard line front to back enless there is a better nylon high pressure fuel line that other people have had good success with.
#2
I want to purchase the Tanks Inc kit for my 72 Cutlass what's going to get a LS1 with a bigger cam. Do I need the High Flow 250 Liter Per Hour Pump for my LS1 or the Deluxe 190 Liter Per Hour Pump? I shouldn't need the higher 400 LPH pump since I'm not going to make 500+ HP. I hope to be close to 400 but I don't know.
I read that 3/8" or -06 AN is ok up to 375 hp. Will I be ok with this size or do I need to go up a size? I think I am going to run a hard line front to back enless there is a better nylon high pressure fuel line that other people have had good success with.
I read that 3/8" or -06 AN is ok up to 375 hp. Will I be ok with this size or do I need to go up a size? I think I am going to run a hard line front to back enless there is a better nylon high pressure fuel line that other people have had good success with.
Im just under 400whp on motor.
#5
TECH Senior Member
iTrader: (12)
Most will go with the Walbro 255, I would not be overkill. I have one in my chevelle and it is a stock engine that puts 330rwhp only.. A regulator well handle regulating the pressure as required or adjusted to.
IMO $10 is not going to kill the budget.. and in this case, better to have it that not !
This way should you do any bolt on's or mods (H/C/I) you well be good.
BC
IMO $10 is not going to kill the budget.. and in this case, better to have it that not !
This way should you do any bolt on's or mods (H/C/I) you well be good.
BC