Need alittle info
Thread Starter
Registered User
Joined: Jul 2012
Posts: 2
Likes: 0
From: Mid-south
Need alittle info Ok guys Im new to this site and looking for a bit of help. Ive got a 94 Silverado I'm stabbing a 6.0L in. If that wasn't enough Im adding a pair of turbos to it. Ive had to make a pair of forward mounted headers simply because I couldn't find any complete. Ive got a harness and ecm programmed. As far as sensors IDK. MAP sensor is no problem. Will I need a boost sensitive MAF sensor. Also the vehicle that the motor came out of had an internal fuel pump modual. Is there a boost sensitive regulator kit to relocate to the rails? Im wanting to use an aeromotive inline pump. And what about O2 sensors? Will the oem work
Ask your programmer if he programmed with Speed Density. If he did you won't need the MAF. You'll need 2 bar or above MAP.
If it's a truck 6.0l like an lq4/9 there were regulators on the rails. But I'd buy a boost reference fuel regulator.
A1000?
You only need the front 2 02s and I'd recommend widebands as well.(for tuning)
If it's a truck 6.0l like an lq4/9 there were regulators on the rails. But I'd buy a boost reference fuel regulator.
A1000?
You only need the front 2 02s and I'd recommend widebands as well.(for tuning)
