tb8125

iTrader: (2)

Ok guys I have been thinking I had a ls1 98 intake with a return fuel line.... We after more searching I now know I have a 98 without a return line.... I need to get this thing plumbed in correctly.... So now I have a line ran from the tank to the evap ( I thought was a return line) and a feed line from rail to pump.... I have a intake regulator and I think the 98 has one on the rail... What do you guys suggest for fuel line set up

rotor vs. piston

iTrader: (3)

c-5 corvette fuel filter, has the return and pressure regulator integrated into it.



Or you may be able to find the rail you need on ebay or the sale section here.

bczee

iTrader: (12)

Rotor, I think you got the inlet and return reversed in your picture... the center one is 5/16" Return and the outer one is 3/8" feed... (I just checked my spare to make sure I wasn't seeing things, again ! LOL).

FYI.. the AC/Delco part number is GF-822.

BC

tb8125

iTrader: (2)

Thanks guys i bought one today from psi one of the site sponsors....

rotor vs. piston

iTrader: (3)

Thanks for clearing it up, I just used the first picture I found on the internet to show TB' what to look for.