Stand alone wiring harness
Thread Starter
Staging Lane
Joined: Feb 2007
Posts: 70
Likes: 0
Stand alone wiring harness Is a buying a stand alone wiring harness worth the money or is it easy to modify the stock harness?
The engine is a 2001 LS1 from a Camaro SS.
Will be swapped into a BMW.
The engine is a 2001 LS1 from a Camaro SS.
Will be swapped into a BMW.
Launching!
Joined: May 2012
Posts: 205
Likes: 2
From: Mobile, Alabama
It depends on what you call easy. I have about 3 or 4 hours in mine and maybe $30.00. You might be more comfortable spending a couple hundred for the peace of mind of a professional harness if you are not that familiar with wiring. It comes down to (like most things) your skill, ability, confidence, budget, and time. There is plenty of info here and LT1swap.com to modify your harness; there are also sponsors here who sell good products.
Thread Starter
Staging Lane
Joined: Feb 2007
Posts: 70
Likes: 0
It depends on what you call easy. I have about 3 or 4 hours in mine and maybe $30.00. You might be more comfortable spending a couple hundred for the peace of mind of a professional harness if you are not that familiar with wiring. It comes down to (like most things) your skill, ability, confidence, budget, and time. There is plenty of info here and LT1swap.com to modify your harness; there are also sponsors here who sell good products.
Do you have any links do DIY-guides regarding modifying the stock harness?
Thread Starter
Staging Lane
Joined: Feb 2007
Posts: 70
Likes: 0
Thanks for the link - I will make sure to check it out!
Launching!
Joined: May 2012
Posts: 205
Likes: 2
From: Mobile, Alabama
http://www.lt1swap.com/98-02_ls1.htm
https://ls1tech.com/forums/conversio...o-lt1-car.html
There is a lot of info in this forum- check the stickies and do some searches
https://ls1tech.com/forums/conversio...o-lt1-car.html
There is a lot of info in this forum- check the stickies and do some searches
