Lq4 fox body engine mount question???

Reply Subscribe

Thread Tools

Search this Thread

Aug 4, 2012 | 02:02 PM

Builtz71

Thread Starter

On The Tree

iTrader: (4)

Joined: Feb 2012

Posts: 167

Likes: 0

From: Oklahoma City,Ok

Lq4 fox body engine mount question???

Just ordered my aje tubular k-member..wondering what motor mounts do I need to bolt the lq4 to the k-member?..

Aug 4, 2012 | 02:48 PM

TopNotchLSX

On The Tree

Joined: Jul 2012

Posts: 120

Likes: 1

From: Bowling Green, Missouri

The AJE LSX engine mounts should be all you need... I think they are $89..ish

Aug 4, 2012 | 03:00 PM

Builtz71

Thread Starter

On The Tree

iTrader: (4)

Joined: Feb 2012

Posts: 167

Likes: 0

From: Oklahoma City,Ok

I bought the complete kit with the control arms,coil overs and mounts...it said for small and big block Chevrolet as well as ls1.. Just didn't know if I needed anything else to bolt to it?

Aug 4, 2012 | 03:26 PM

TopNotchLSX

On The Tree

Joined: Jul 2012

Posts: 120

Likes: 1

From: Bowling Green, Missouri

I would just make sure the mounts bolt to the engine and check to make sure all the hardware is there. If so, the tranny crossmember should be you next main concern.

Aug 4, 2012 | 03:33 PM

The stunningman

9 Second Club

iTrader: (47)

Joined: Aug 2006

Posts: 761

Likes: 1

Quote:

Originally Posted by Builtz71

I bought the complete kit with the control arms,coil overs and mounts...it said for small and big block Chevrolet as well as ls1.. Just didn't know if I needed anything else to bolt to it?

The AJE big block small block and LSX mounts are all the same mounts. I'm guessing they would be included with your order. You only use three holes on the LS1 install.

Aug 4, 2012 | 08:38 PM

Builtz71

Thread Starter

On The Tree

iTrader: (4)

Joined: Feb 2012

Posts: 167

Likes: 0

From: Oklahoma City,Ok

Quote:

Originally Posted by TopNotchLSX

I would just make sure the mounts bolt to the engine and check to make sure all the hardware is there. If so, the tranny crossmember should be you next main concern.

I was planning on going with a th400..I seen that aje made a trans crossmember also..do you know if it's any good?

Quote:

Originally Posted by The stunningman

The AJE big block small block and LSX mounts are all the same mounts. I'm guessing they would be included with your order. You only use three holes on the LS1 install.

Awesome!..that's what I needed to know,thanks

Reply Subscribe