1969 Nova LS3/Auto
Thread Starter
Registered User
Joined: Sep 2012
Posts: 24
Likes: 0
1969 Nova LS3/Auto Picked up an 1969 Nova from my buddy Travis. This was his car in high school and has been sitting in his garage for the passed 9 years. It had a 4 bolt 350 and TH350 before.
first time out of the garage since circa 04'
L92 got her stripped down with all the truck stuff off. time for a thorough cleaning of the block, removal of the heads, and LS3 conversion. going with a prosystems carb and 6LS box. cam is coming from LG motorsports.
hoping this is the end result
first time out of the garage since circa 04'
L92 got her stripped down with all the truck stuff off. time for a thorough cleaning of the block, removal of the heads, and LS3 conversion. going with a prosystems carb and 6LS box. cam is coming from LG motorsports.
hoping this is the end result
Thread Starter
Registered User
Joined: Sep 2012
Posts: 24
Likes: 0
my L92 came with a 6L80E from a yukon, however it has a transfer case on it for awd.
anyone know where I could sell it and how much its worth ? has 36k miles on it. I heard the TBSS guys use them as a upgrade ?
anyone know where I could sell it and how much its worth ? has 36k miles on it. I heard the TBSS guys use them as a upgrade ?
Thread Starter
Registered User
Joined: Sep 2012
Posts: 24
Likes: 0
I removed one of the heads last night and inspected the cylinder, they look great and show little signs of wear. though it does have low miles it looks as though the previous owner slacked on oil changes.
now taking them to my buddy TC's shop for inspection and some clean up work on the ports.
now taking them to my buddy TC's shop for inspection and some clean up work on the ports.
Dirty Dingo for mounts.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Trending Topics
For some reason I can't see the pics. Dirty Dingo is a good choice for mounts, though it's pretty easy to fab your own.
If you're serious about not wanting to go AWD (which I think would be pretty sick), hit the Performance Trucks side of this site and toss the TC on the classifieds there.
Good luck with the build. There's a ton of info in the x-body swap thread.
If you're serious about not wanting to go AWD (which I think would be pretty sick), hit the Performance Trucks side of this site and toss the TC on the classifieds there.
Good luck with the build. There's a ton of info in the x-body swap thread.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
get ready for some serious lifter noise. i'm interested to see what it makes on the dyno when you're done. depending on what you're doing with the car I'd think about talking to pat g instead. I'm a little underwhelmed with my g6x3 setup.
