When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
when doing an ls swap to any given vehicle they alll require a new or modified driveshaft correct. So my quesion is lets say i do an ls1-4l60e swap and later on decide to swap to a t56, do i need a new driveshaft?
The 4l60e and the T56 have the same spline count and the same length. You should be able to swap to a T56 with no issues other than maybe driveline angle (I'm not sure if the cross member mounts are in the same position)
The 4l60e and the T56 have the same spline count and the same length. You should be able to swap to a T56 with no issues other than maybe driveline angle (I'm not sure if the cross member mounts are in the same position)
Thats what i figured provided its an fbody transmision. I can get a good deal froma bdduy for an ls auto setup. I can run thay until i can afford a t56.