1970 Chevelle going for broke!
Ok got another video for you guys please let me know what you think and give me your good or bad feedback!
http://
http://
Last edited by E.rodz; Dec 19, 2012 at 11:10 PM.
The shop has only taking me 22 years to get it to this point it definitly did not happen overnight. Thanks for the interest and please keep following the build it is going to start getting good soon!
I has been a interesting to sat the least progress has been a bit slow had a big scare with my wife and after a few trips to the hospital thinking my wife was having a heart attack! big scare and still have along way to go to get things back to normal but still attempting to make some progress.
not a whole lot of progress more like the opposite of progress!
not a whole lot of progress more like the opposite of progress!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Well looks like we finally made it to the mock up stage! starting to fab up some parts and pieces trying to figure out ride height,motor placement,and firewall mods. to be done.
We have been trying to get the front drive accessories done so we can get to mocking up the motor and tranny .
still waiting on a couple pulleys and spacers but almost there should have plenty of room for ex. now
still waiting on a couple pulleys and spacers but almost there should have plenty of room for ex. now
Made another video please check it out and let me know what you think!
[/yt]pCAspJYBlCkyt]
http://youtu.be/pCAspJYBlCk
[/yt]pCAspJYBlCkyt]
making some progress getting some brake brackets fabbed up rotors by R1 concepts making progress now.
kicking it old school plasma cutting freehand no cnc. grinding and more grinding.
kicking it old school plasma cutting freehand no cnc. grinding and more grinding.
progress has been slow still plugging away but lots of distractions lately.finished up the front brake brkts. these were cut out freehand with a plasma cutter then ground smooth no laser or water jet here.trying to get a new web site up and running and getting a azzz kicking.
here is a little hint on whats coming up next.
here is a little hint on whats coming up next.
almost finished the drive accessories still a couple of details to work out yet. this should give me plenty of room to run the headers forward.
next stop firewall cleaning and filling great another project for the grinder.
next stop firewall cleaning and filling great another project for the grinder.
looks like it is about hole filling time! ye frickin haw. this is not one of my favorite jobs by any means but it must be done for progress goes on.
oh crap that idea went really wrong looks like I made more holes and these are alot bigger!
oh crap that idea went really wrong looks like I made more holes and these are alot bigger!
got a bit more work done on the car fabricated a fan shroud for the new radiator.
started fabbing some more parts out of a old electric panel any guesses on what they might be?
started fabbing some more parts out of a old electric panel any guesses on what they might be?