E67 computer VSS questions, please
#1
Teching In
Thread Starter
Join Date: Feb 2012
Location: North Louisiana
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Is the E67 'puter's VSS input sine-wave or square-wave, please? And, does GM's 17-pulses/rotation terminology equal 17K ppm in the speak of others? I've searched about on the Web with few and/or confusing results.
Thanks, in advance for any clarification!!!
Thanks, in advance for any clarification!!!
#2
TECH Resident
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Square wave. 17 pulses per drive shaft rev. Converted through the ECM to deliver 4k PPM to the speedo.
#3
Teching In
Thread Starter
Join Date: Feb 2012
Location: North Louisiana
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thank YOU!!! Just what I needed!!!
Oops, just saw this below from "garys 68" on another thread when I asked about the T56 output to the E67 (since I didn't know where to ask for sure):
"sine wave vss output from trans to ecu. square wave ecu output to speedo."
Oops, just saw this below from "garys 68" on another thread when I asked about the T56 output to the E67 (since I didn't know where to ask for sure):
"sine wave vss output from trans to ecu. square wave ecu output to speedo."
Last edited by Avanti; 11-28-2012 at 09:35 PM.