Anyone swaped a L92 from a E38 to a E67?
Thread Starter
Teching In
Joined: Aug 2012
Posts: 4
Likes: 0
From: Bellingham, Wa.
Anyone swaped a L92 from a E38 to a E67? Ok I have spent the last two days looking for info on my 09 L92 from an escalade. I am ready to pin out the ecu, and am trying to figure out if I can get cruise control to work. I read that the E67 is capable to do this, is this true? If so how would I go about the swap? Thank You.. The project is a 82 Jeep full size truck. PS.. I am newly register user, long time lurker.. Thanks.
Thread Starter
Teching In
Joined: Aug 2012
Posts: 4
Likes: 0
From: Bellingham, Wa.
My unfruitful search showed me that early DBW motors with a Atac module for the gas pedal can adapt cruise. But the later DBW 06~07 up do not have a seperate Atac module. I have searched here, google, all the offroad forums that I am on. I even PM's speartech asking questions.. So its not for a lack of trying.. I went as far as to as the guys from MAST at SEMA this year if it was possible..
They are saying it's for all the motors that use the E38. I would give them a call.
http://spankysrodshop.net/index.php?...ories&Itemid=7
http://spankysrodshop.net/index.php?...ories&Itemid=7
Thread Starter
Teching In
Joined: Aug 2012
Posts: 4
Likes: 0
From: Bellingham, Wa.
I called Spanky's and talked with them.. never got an email with the details, must be too busy. did some more digging and found this.
http://www.thecruisecontrolstore.com.../0002/250-9617
Looks to be a plug and play with the throttle harness.. any ideas, or anyone installed one yet?
http://www.thecruisecontrolstore.com.../0002/250-9617
Looks to be a plug and play with the throttle harness.. any ideas, or anyone installed one yet?
