1969 Camaro LSI conversion
Thread Starter
Registered User
Joined: Nov 2012
Posts: 2
Likes: 0
1969 Camaro LSI conversion I have a few friends who want me to do a conversion from a stock 350 cu in to an LS1 conversion. This has me very interested as this is a build that my duaghter and I are doing for her first project vehicle. Can anyone tell me what I need to do for a conversion like this. What parts etc... I have an LS1 with 12,000 original miles from one of the guys who wants me to do this.
Any help would be much appreciated!
Any help would be much appreciated!
Launching!
Joined: May 2011
Posts: 230
Likes: 0
I have a few friends who want me to do a conversion from a stock 350 cu in to an LS1 conversion. This has me very interested as this is a build that my duaghter and I are doing for her first project vehicle. Can anyone tell me what I need to do for a conversion like this. What parts etc... I have an LS1 with 12,000 original miles from one of the guys who wants me to do this.
Any help would be much appreciated!
Any help would be much appreciated!
Fuel system redone, custom headers, motor mounts, tranny mount, wiring harness....etc...etc... It's worth the effort in the end, but there's a lot to think about.
Here is the question. What does your budget look like? I was trying to do a budget 69 camaro swap to help aid other camaro owners that do not have a big budget.
Mount plates can be had cheap if you make your own or buy them. $50-100
Oil pan, if ur ls1 has the fbody pan it can work but may barely hit the center link with the correct plates. If not a ctsv pan $200 or holly pan $400
Exhaust, fbody manis fit or headers can be from $400-$1000
Transmission crossmember mount depends on what your going with or make your own.
Fuel system from around $200-???????
You just need to be more specific on what exactly you have on ur ls1 n your wallets thickness.
Mount plates can be had cheap if you make your own or buy them. $50-100
Oil pan, if ur ls1 has the fbody pan it can work but may barely hit the center link with the correct plates. If not a ctsv pan $200 or holly pan $400
Exhaust, fbody manis fit or headers can be from $400-$1000
Transmission crossmember mount depends on what your going with or make your own.
Fuel system from around $200-???????
You just need to be more specific on what exactly you have on ur ls1 n your wallets thickness.
