4L60E pnp switch
Thread Starter
Teching In
Joined: Sep 2010
Posts: 30
Likes: 0
4L60E pnp switch The PNP switch has a range selector that works by decoding a 4 pins (A, P, B, C) to know the shift position: I attached the logic table.
With a decoder like 74HC138 we could make the lokar **** indicator work.
http://www.lokar.com/product-pgs/shi...-dash-ind.html
The problem is these decoders only work on 5V. Has anyone managed to interface with the PNP switch to make something like this work?
Lokar has a decoder but is cable operated and I'm thinking it must be possible without it.
Thanks!
Kurt
With a decoder like 74HC138 we could make the lokar **** indicator work.
http://www.lokar.com/product-pgs/shi...-dash-ind.html
The problem is these decoders only work on 5V. Has anyone managed to interface with the PNP switch to make something like this work?
Lokar has a decoder but is cable operated and I'm thinking it must be possible without it.
Thanks!
Kurt
