Harness question
Thread Starter
Teching In
Joined: May 2008
Posts: 12
Likes: 0
Harness question Hello, ripped out my dash and did some celan up work on both sides of the firewall. I want to take advantage of the easy access and do all of the wiring, AC, ducting before i weld the dash in.
I was looking at the GMPP http://store.chevroletperformance.co...-19201861--%3E
but was wondering if their might be a better route? Also I may go LSA can I purchase a harness that will work on LS3 or LSA and pick up the controler later?
I was looking at the GMPP http://store.chevroletperformance.co...-19201861--%3E
but was wondering if their might be a better route? Also I may go LSA can I purchase a harness that will work on LS3 or LSA and pick up the controler later?
That looks like a nice conversion kit. If you don't want to spend so much coin you can get a harness from an LS car or truck and mod it for stand alone use yourself. www.LT1wsap.com has a lot of great info for doing the mods yourself, or you can buy a kit from Bill at www.bp-automotive.com or check out some of his product at http://stores.ebay.com/BP-Automotive-and-Wiring
