89 Formula - Speedo
Thread Starter
On The Tree
Joined: Mar 2011
Posts: 184
Likes: 1
89 Formula - Speedo I finished my swap (LS2/4L65e) but my speedo pegs (140 mph) at about 20 mph. Here is a pic of the HP Tuner page - had the car tuned at a dyno shop. I know my Formula speedo needs 4000 pulses per mile to work properly.
Tire size and gears are correctly entered on the other tab. On this tab showing, are these values calculated, or were they manually entered?
Trying to make the Midwest f-body event at Road America this Saturday!
A pic of my fresh paint.
Thanks for any help,
Brian
Tire size and gears are correctly entered on the other tab. On this tab showing, are these values calculated, or were they manually entered?
Trying to make the Midwest f-body event at Road America this Saturday!
A pic of my fresh paint.
Thanks for any help,
Brian
Thread Starter
On The Tree
Joined: Mar 2011
Posts: 184
Likes: 1
Finally, Success!
Dakota Digital told me that the GM signal is 'dirty' so he sent me this filter diagram to clean up the signal. Supposedly GM has filters inside the stock gauges. Anyway, installed the filter and speedo works.
On the Dakota Box I had :
Switch #1 ON
Switch #2 ON
and using 4000 ppm signal output
Dakota Digital told me that the GM signal is 'dirty' so he sent me this filter diagram to clean up the signal. Supposedly GM has filters inside the stock gauges. Anyway, installed the filter and speedo works.
On the Dakota Box I had :
Switch #1 ON
Switch #2 ON
and using 4000 ppm signal output
