V12 LS1 Build
TECH Apprentice
Joined: Dec 2004
Posts: 358
Likes: 1
Attachment 513417
Attachment 513418
Attachment 513419
Longblock is officially done. Deciding what we're going to do with the fuel system and then we'll have a runner.
Attachment 513418
Attachment 513419
Longblock is officially done. Deciding what we're going to do with the fuel system and then we'll have a runner.
I've seen some LS guys plumb each cyl head with braided lines and fittings so that the coolant is more equally distributed into the heads. it's typically a race only mod but I agree with a v12 it might be a really good idea.
for the work and $$ spent on this little puppy it would be worth it and not overly hard to do.
Registered User
Joined: Nov 2015
Posts: 2
Likes: 0
V12 ls cyl.head Hi... I'm building a 300 ci Ford 6 cyl. motor. I need to know how much it would cost to weld together the ls cyl. Heads to make a 6 cyl. Head. Someone's done this swap before but they epoxied the heads together and it leaked water
If I send you the 2 heads cut already a little long can you finish machine them to length and weld them together. How much would it cost ? Thanks Jack
If I send you the 2 heads cut already a little long can you finish machine them to length and weld them together. How much would it cost ? Thanks Jack
Registered User
Joined: Nov 2015
Posts: 2
Likes: 0
[QUOTE=Jack Stark;19048612]Hi... I'm building a 300 ci Ford 6 cyl. motor. I need to know how much it would cost to weld together the ls cyl. Heads to make a 6 cyl. Head. Someone's done this swap before but they epoxied the heads together and it leaked water
If I send you the 2 heads cut already a little long can you finish machine them to length and weld them together. How much would it cost ? Thanks Jack you can reach me at jackstark1@aol.com
If I send you the 2 heads cut already a little long can you finish machine them to length and weld them together. How much would it cost ? Thanks Jack you can reach me at jackstark1@aol.com
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
https://ls1tech.com/forums/conversio...hallenges.html
Teching In
Joined: Oct 2016
Posts: 1
Likes: 0
Let me know if anyone is interested in a 1 piece V12 LS camshaft. We...Camshaft machine company can build it to any spec/ timing and lobe profile you need!
Rodney
Teching In
Joined: Nov 2015
Posts: 3
Likes: 0
V12 cam [QUOTE=LScam man;19430386]Let me know if anyone is interested in a 1 piece V12 LS camshaft. We...Camshaft machine company can build it to any spec/ timing and lobe profile you need!
Rodney[/QUOTE
Yes I am interested in a 1 piece LS V12 cam. Also a crank. At this time, I am still in the planning stages of the project and I'm trying to gather all resources needed to do the build. The 2 greatest obstacles a can foresee would be the cam and crank. So yes I am interested if you could provide some more info! I'm in CA, BTW.
Rodney[/QUOTE
Yes I am interested in a 1 piece LS V12 cam. Also a crank. At this time, I am still in the planning stages of the project and I'm trying to gather all resources needed to do the build. The 2 greatest obstacles a can foresee would be the cam and crank. So yes I am interested if you could provide some more info! I'm in CA, BTW.
