Need pinouts for C1, C3, and C4. Please help.

Reply Subscribe

Thread Tools

Search this Thread

Jun 9, 2013 | 12:20 AM

chronoix

Thread Starter

Teching In

iTrader: (1)

Joined: Apr 2013

Posts: 4

Likes: 0

Need pinouts for C1, C3, and C4. Please help.

Hey I am doing a 5.3 swap in my regal. Buddy found a fuse box from an 01 silverado so im going to use it in my swap. I have the pinouts for C2 but I need the ones for the other connectors. I tried searching for this but only found 1 thread and the person who supplied the info did it by email.

These are the connectors that go in the bottom of the fuse box under the hood.

Thanks in advance!

Jun 10, 2013 | 04:33 PM

chronoix

Thread Starter

Teching In

iTrader: (1)

Joined: Apr 2013

Posts: 4

Likes: 0

Bump. Also, to clarify this is the fuse box for an 02 tahoe, silverado, yukon or sierra.

Jun 10, 2013 | 04:41 PM

TopNotchLSX

On The Tree

Joined: Jul 2012

Posts: 120

Likes: 1

From: Bowling Green, Missouri

Check out LT1swap.com Tons of wiring info there and many people use it including myself. Full diagrams and pinout information.

Jun 10, 2013 | 05:27 PM

chronoix

Thread Starter

Teching In

iTrader: (1)

Joined: Apr 2013

Posts: 4

Likes: 0

Quote:

Originally Posted by TopNotchLSX

Check out LT1swap.com Tons of wiring info there and many people use it including myself. Full diagrams and pinout information.

Ya, I have been looking there pretty often as I am getting ready to do my harness. He is also going to be doing my programming for the PCM.
He has a page talking about using the stock fuse block but it only has info on 2 pins on C1. I am trying to get a full pin out as I am doing all new wiring and am going to use the fuse block to power my a/c, headlights, etc.