5.3 s10 blazer
07-29-2013, 09:19 PM
#21
Do u remember what the back spacing is on the rear? I'm shopping around on wheels for my s10 but I not 100% on what to get for the rear,I swapped to an 8.8 rear from an explorer but I narrowed it 3" by using 2 pass. Side axles but its still wider then a stock 2wd s10 rear by like an 1 1/16" per side
08-09-2013, 12:35 AM
#23
Launching!
iTrader: (4)
Join Date: May 2010
Location: asheboro, nc
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Looks great, like how u chopped up the stock 4.3v6/sbc A/C bracket an made it work on the ls engine, I think I'll give that a shot on my s10 when I put my iron block ls1 in, really like having a/c an would love to keep it lol
08-09-2013, 07:45 AM
#24
http://www.maliburacing.com/forum/vi...p?f=34&t=79059
Im still gonna add one more brace from the extra hole to the head. I used a little thicker material on the one to the water pump too
The backspacing on the rear wheels are 5.5, the fronts are 4.25. Found my receipt yesterday
Last edited by snook; 08-09-2013 at 08:05 AM.
08-09-2013, 05:31 PM
#26
That should work, only thing on the coys is the max backspacing on 17 18 and 19s are 5.5, would have to special order.
http://www.v8s10.org/forum/viewtopic.php?f=52&t=34743
http://www.v8s10.org/forum/viewtopic.php?f=52&t=34743
Last edited by snook; 08-09-2013 at 05:40 PM.
08-09-2013, 05:47 PM
#27
Launching!
iTrader: (4)
Join Date: May 2010
Location: asheboro, nc
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
O ok well I was looking at some of the knock off of the coys wheels, but idk, I really like the look of the older 5spoke ss/zr1 wheels on a sq body s10 but not a big fan of wheel spacers
09-12-2013, 08:26 PM
#30
yep, has about an inch. if the belt flexes that much im in trouble. you can add another or bigger idler if you think its too close. could use one off the tensioner, thy are quite a bit bigger. This isn't mine, but its nearly identical
In this pic the blue tape is the housing, belt isn't close, may be more than an inch, the red letters are the dayco belt. was 109.25 inches
In this pic the blue tape is the housing, belt isn't close, may be more than an inch, the red letters are the dayco belt. was 109.25 inches
Last edited by snook; 09-12-2013 at 08:36 PM.
09-13-2013, 09:57 AM
#32
I just copied the Malibu racing thread and added thicker stuff. Still gotta add 1 more brace from he extra hole to the head. The belt length should get you close, but if you move the compressor up or down any its gonna change it, Idler sizes too, but at least its a starting point.
10-04-2013, 08:39 PM
#38
Staging Lane
Join Date: Jun 2013
Location: KC MO
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Its a secret, lol.........
I painted a plain lid with wrinkle black paint, baked it, then put the lsx emblem on it
LSX Impala Buick Regal LSX Engine Emblems Badges : Amazon.com : Automotive
I painted a plain lid with wrinkle black paint, baked it, then put the lsx emblem on it
LSX Impala Buick Regal LSX Engine Emblems Badges : Amazon.com : Automotive
well looks good anyways lol