Engine swap questions
Thread Starter
TECH Fanatic
iTrader: (12)
Joined: Apr 2007
Posts: 1,276
Likes: 0
From: Douglasville, GA
Engine swap questions I've got a 2001 5.3 in my 68 c10, I'm wanting to swap something bigger in but not have to swap harnesses and everything else. Is the biggest I can swap in a 6.0(bored out) and have everything plug up and be controllable by my current PCM?
I'd love an ls2 or 3 but figure they won't be an easy swap.
I'd love an ls2 or 3 but figure they won't be an easy swap.
Thread Starter
TECH Fanatic
iTrader: (12)
Joined: Apr 2007
Posts: 1,276
Likes: 0
From: Douglasville, GA
TECH Fanatic
Joined: May 2010
Posts: 1,081
Likes: 8
From: Atlanta, Ga
Ditto bczee, if you are using DBW swapping to the LS2 will require using the 5.3 TB. In any event you will most likely need to use the entire existing harness in the truck and possible make a few small sensor connection mods.
