6L80E tailshaft
Thread Starter
Staging Lane
Joined: Mar 2005
Posts: 81
Likes: 0
From: Baton Rouge
6L80E tailshaft using a 6L80E transmission
from an 09 pontiac G8 GT in my build
looking for information on replacing the
tailpiece with a standard yoke/u-joint
arrangement.
anyone done this and do you have pictures
thanks
from an 09 pontiac G8 GT in my build
looking for information on replacing the
tailpiece with a standard yoke/u-joint
arrangement.
anyone done this and do you have pictures
thanks
Staging Lane
Joined: Jun 2012
Posts: 64
Likes: 0
From: Nor Cal
I'm not sure what tailshaft the g8 has but I have the one out of a 5th gen camaro thats very short. I just used a turbo 400 yoke that I had machined out on the inside. I can take pictures of it tomorrow if you like.
Staging Lane
Joined: Jun 2012
Posts: 64
Likes: 0
From: Nor Cal
Sorry about the blurry pictures. I still have an old flip phone that takes terrible pics. You might be able to see theres a step inside the yoke. I used the 3 flange 'donut' yoke and just machined the inside to match.
Thread Starter
Staging Lane
Joined: Mar 2005
Posts: 81
Likes: 0
From: Baton Rouge
going to look for a tear down diagram of
6L80E to see what is involved for mod.
