Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Retro Harness wiring problem (02s)

Thread Tools
 
Search this Thread
 
Old 10-10-2014 | 09:15 PM
  #1  
Burk's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Sep 2014
Posts: 20
Likes: 1
Default Retro Harness wiring problem (02s)

Im working on getting my harness made up using the lt1swap.com diagrams etc. Ive got everything done but the Bank 2 Sensor 1 connector. My harness had a bundle cut out when I got it that was up inline with the MAF/IAT sensor bundle. The 66 pin (Bank 2 Sensor 1) wire was one of the wires that was in the cut off bundle with a pink, ground, and tan o2 wire.

The car was a 2002 tahoe 4x4 does this sound right to have the 02 wiring so far forward? I have a new connector I can wire into the cutoff wires, just want to make sure im putting it in the right spot...
Old 10-10-2014 | 09:37 PM
  #2  
tfi racing's Avatar
TECH Resident
iTrader: (2)
 
Joined: Jun 2010
Posts: 751
Likes: 10
From: Cedar,BC
Default

IIRC,that sounds about right.



Quick Reply: Retro Harness wiring problem (02s)



All times are GMT -5. The time now is 03:29 AM.