thermostat housing
Thread Starter
Teching In
Joined: Jun 2013
Posts: 17
Likes: 0
12 Second Club
Joined: Jan 2014
Posts: 565
Likes: 0
From: 217
I'll try to get a pic and post it on my build thread and here. My tstat housing was sitting right over the frame rail and the lower hose would have had to make a 180 to go in. Not good. Some have also used a Windstar 3.8 housing that has a the nipple sticking straight out. I got both at the junk yard and paid $1.35 for them, but I pulled them. I went with the mustang one because I only had to mod the original lower hose to fit and it gave good clearance.
