4wd low signal help
01-12-2015, 04:42 PM
#1
Registered User
Thread Starter
Join Date: Dec 2014
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
4wd low signal help I'm getting 10.48 volts out of the computer where 4wd low signal is suppose to be. On the red connector number 16 pin. This is a 2001 5.3l 4wd computer. I thought that it was supposed to receive a ground signal when in 4lo not give off volts
Last edited by pointb912; 01-12-2015 at 05:07 PM.
