Water pump, front accessory question...
Thread Starter
Teching In
Joined: Mar 2015
Posts: 49
Likes: 0
From: Rockdale, TX
Water pump, front accessory question... I bought a 2005 GTO water pump today because I want to use the pump with the front discharge. My question is what drive accessories can I use on the motor. This is all going into my 93 mustang swap on a LQ4 LS.
Thanks in advance,
Dogman
Thanks in advance,
Dogman
Holley makes nice kits that work with a variety of balancer and water pump spacing. They have a great PDF that spells it all out:
http://documents.holley.com/199r10640rev.pdf
Andrew
Thread Starter
Teching In
Joined: Mar 2015
Posts: 49
Likes: 0
From: Rockdale, TX
Dogman,
Holley makes nice kits that work with a variety of balancer and water pump spacing. They have a great PDF that spells it all out:
http://documents.holley.com/199r10640rev.pdf
Andrew
Holley makes nice kits that work with a variety of balancer and water pump spacing. They have a great PDF that spells it all out:
http://documents.holley.com/199r10640rev.pdf
Andrew
Thanks Andrew. I'll check it out.
GTO pump has the same offset as the Camaro/firebird stuff. Wont work with corvette or truck acc. Unless you buy a spacer kit to go behind it, then you can make it work with the truck acc. Check with Dirty Dingo for that kit
Thread Starter
Teching In
Joined: Mar 2015
Posts: 49
Likes: 0
From: Rockdale, TX
water pump... Thanks again.
As Stated the Holley bracket kit will work for any spacing. You just need the correct spacer kit for their brackets. Great stuff! Looks like factory corvette setup when installed.
12 Second Club
Joined: Jan 2014
Posts: 565
Likes: 0
From: 217
You might look at this too, if you have a truck balancer and the water pump has the wide pulley. That way you can use the P/S pump and alt you already have.
http://www.scramspeed.com/products/s...tang-swap.html
http://www.scramspeed.com/products/s...tang-swap.html
