Lq9

Reply Subscribe

Thread Tools

Search this Thread

Jul 7, 2015 | 06:59 AM

6.0c10

Thread Starter

Teching In

Joined: Jul 2015

Posts: 2

Likes: 0

Lq9

Im building a lq9 for my 1983 c10 with ls3 heads and truck intake i bought a l96 that has a broken block for parts and it came with the wireing harness can i use the wireing harness on my lq9? Thx

Jul 7, 2015 | 03:51 PM

garys 68

TECH Junkie

iTrader: (1)

Joined: Dec 2007

Posts: 3,724

Likes: 39

From: Camdenton, MO

The L96 is a Gen IV with 58x reluctor, can phasing, and completely different DBW system. Too much work and expense to try and make it work on an LQ9.

Jul 7, 2015 | 08:32 PM

jcvett56

On The Tree

Joined: Sep 2007

Posts: 196

Likes: 0

Like Gary said, it's a 24x engine and the harness you have is for a 58x. So unfortunately you aren't going to be able to utilize that harness.

You can always order a new harness from Speartech Speartech DBW Setup

The good thing with Speartech is that every harness is wired on an actual engine and tested before shipping!

Jul 8, 2015 | 07:31 AM

6.0c10

Thread Starter

Teching In

Joined: Jul 2015

Posts: 2

Likes: 0

What if i use all the stuff from the l96 on my lq9 like the crank and timing cover to use the 58x reluctor wheel and the 4x cam and make my lq9 to a gen 4

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last