ls1 e46... AWD
Thread Starter
Registered User
Joined: Jul 2017
Posts: 1
Likes: 0
ls1 e46... AWD Hello. I had an idea a few months ago and then came upon this website today... I would like to take my 2004 325xi and put an LS1 in it. Now, this would be simple, I could just order a kit. However, I want to do AWD burn outs (with 6 inch width all-season tires).
This is the first time I have sat down and really started looking into this swap. To my knowledge, I would be the first person to do this. Do you have any advice on how to have an AWD system?
This is the first time I have sat down and really started looking into this swap. To my knowledge, I would be the first person to do this. Do you have any advice on how to have an AWD system?
https://forum.bodybuilding.com/showt...hp?t=131568333
http://forum.e46fanatics.com/showthread.php?t=916160
http://www.e90post.com/forums/showthread.php?t=1048781
Here's what you're dealing with --- http://www.awdwiki.com/images/bmw-325ix-e30_xxx.jpg
Will the LS/tranny fit in place of the 6/tranny? Could be made to - probably. Will the 2004 naturally aspirated BMW drivetrain stand up to the torque? I doubt it. If you start out with a newer 335xi (turbo 6) - probably. But you'd be much better off in my opinion modding the OEM turbo six - lots of easy HP/torque available with minor mods.
http://forum.e46fanatics.com/showthread.php?t=916160
http://www.e90post.com/forums/showthread.php?t=1048781
Here's what you're dealing with --- http://www.awdwiki.com/images/bmw-325ix-e30_xxx.jpg
Will the LS/tranny fit in place of the 6/tranny? Could be made to - probably. Will the 2004 naturally aspirated BMW drivetrain stand up to the torque? I doubt it. If you start out with a newer 335xi (turbo 6) - probably. But you'd be much better off in my opinion modding the OEM turbo six - lots of easy HP/torque available with minor mods.
