Drive by wire pedal installation

Reply Subscribe

Thread Tools

Search this Thread

Aug 29, 2017 | 07:37 AM

Blue1

Thread Starter

Teching In

Joined: Apr 2017

Posts: 20

Likes: 0

Drive by wire pedal installation

Hello, I'm getting closer to my ls2 swap into 1968 nova. I have a trailblazer ss ls2, trans, pedal, etc. wondered if anyone out there has installed this huge pedal assembly in a nova? Any help would be greatly appreciated! Thanks

Aug 29, 2017 | 05:59 PM

Project GatTagO

TECH Senior Member

iTrader: (7)

Joined: Mar 2003

Posts: 10,615

Likes: 1,883

From: Little Austin

Not sure exactly what your pedal looks like, but this might be an option:

http://www.ironworksspeedandkustom.c...rod/prd336.htm

Andrew

Aug 30, 2017 | 12:46 AM

Blue1

Thread Starter

Teching In

Joined: Apr 2017

Posts: 20

Likes: 0

Thanks I'll take a look at that.

Sep 4, 2017 | 04:39 PM

NC_John

Staging Lane

iTrader: (1)

Joined: Mar 2015

Posts: 96

Likes: 1

From: Rockwell, NC

This works for early C-10's - I have one in my 70. There are a bunch of pictures so you could see if it might work for your nova.

http://67-72chevytrucks.com/vboard/s...d.php?t=631165

Sep 4, 2017 | 06:09 PM

Blue1

Thread Starter

Teching In

Joined: Apr 2017

Posts: 20

Likes: 0

Thanks!

Sep 4, 2017 | 06:58 PM

brandon6.0

TECH Addict

iTrader: (32)

Joined: Dec 2009

Posts: 2,331

Likes: 29

From: Glennville, GA.

yea that pedal should work as long as it is a 6pin connector. The older stuff that was dbw was around 12 pin connector and will not work.

The only diff between the car and truck pedal are 2 pins that need to be switch around.

Sep 4, 2017 | 07:12 PM

NC_John

Staging Lane

iTrader: (1)

Joined: Mar 2015

Posts: 96

Likes: 1

From: Rockwell, NC

I actually meant the mount bracket adapter.... he (hartrod) has them for both the truck and vette pedals. Makes the dbw pedal a bolt-in for the 67-72 trucks.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last