Gen V Fuel system
#1
Gen V Fuel system
I know this has been asked before but it seems as though I keep getting conflicting feedback regarding the requirements of running the GEN 5L 83 motor some people say a class at 72 PSI with our regular Walborough pump that can keep up with it regulated to 72 PSI? I know this has been asked before but it seems as though I keep getting conflicting feedback regarding the requirements of running the GEN 5L 83 motor some people say a constant 72 PSI with our regular Walborough pump that can keep up with that regulate it to 72 PSI?
I know Vanetta has done a few, I was going to do this in my 59 Biscayne runnng a Gen V L83
Tanks inc tank with the GPA-6 pump capable of supplying 100 PSI REGULATED down to 72 psi with a return line back to the tank....
other suggestions?
Thoughts/comments/suggestions greatly welcomed and appreciated thank you in advanced
I know Vanetta has done a few, I was going to do this in my 59 Biscayne runnng a Gen V L83
Tanks inc tank with the GPA-6 pump capable of supplying 100 PSI REGULATED down to 72 psi with a return line back to the tank....
other suggestions?
Thoughts/comments/suggestions greatly welcomed and appreciated thank you in advanced
#2
Joined: Mar 2003
Posts: 10,244
Likes: 1,530
From: The City of Fountains
The GM installation guide for the LT1 has some suggestions.
https://www.chevrolet.com/content/da...0-19370322.pdf
Andrew
https://www.chevrolet.com/content/da...0-19370322.pdf
Andrew
#3
The GM installation guide for the LT1 has some suggestions.
https://www.chevrolet.com/content/da...0-19370322.pdf
Andrew
https://www.chevrolet.com/content/da...0-19370322.pdf
Andrew