Adding mini fuse to GMPP fuse box

Reply Subscribe

Thread Tools

Search this Thread

Feb 24, 2019 | 10:14 PM

rcarson

Thread Starter

Teching In

iTrader: (12)

Joined: Aug 2004

Posts: 38

Likes: 0

From: Mid TN

Adding mini fuse to GMPP fuse box

Like the title say I am looking to add a mini fuse to the GMPP fuse block. There are plenty of open slots, and I thought they would take metri pack 280 like the relay portion of the block, but that doesn’t seem to be the case. Also I know the Maxi fuses take the 800 series. Does anybody know what terminal I need to add the mini fuses to this fuse block? Thanks

Feb 25, 2019 | 05:30 AM

79LS1FOX

TECH Regular

iTrader: (11)

Joined: Jan 2009

Posts: 441

Likes: 36

Try these guys.....
https://www.delcity.net/store/1-way-...SABEgIpcPD_BwE

Feb 25, 2019 | 01:06 PM

rcarson

Thread Starter

Teching In

iTrader: (12)

Joined: Aug 2004

Posts: 38

Likes: 0

From: Mid TN

Thanks, but those are definitely not what I need. What normally goes there looks similar to the 280 series, but it is slightly different and has a keeper tab at the base similar to a bus bar terminal, but an individual piece. I was able to modify the 280 series terminal to make it work and it will stay in place, but it does not have the keeper tab which I am sure is there to prevent wear on the lock from install and removal of fuses. Guess I just have to be more careful.

Feb 25, 2019 | 02:02 PM

samckitt

TECH Enthusiast

iTrader: (5)

Joined: Dec 2005

Posts: 535

Likes: 9

From: Williamsburg, VA

How about these? Kinda expensive, probably find them cheaper.

https://jaydeeautocables.com.au/coll...terminal-magft
https://jaydeeautocables.com.au/coll...ack-con-busbar

Feb 25, 2019 | 06:49 PM

rcarson

Thread Starter

Teching In

iTrader: (12)

Joined: Aug 2004

Posts: 38

Likes: 0

From: Mid TN

Not those either here is a pic of what it looks like.

Again, I was able to slightly modify a tangless 280 to work, I don’t have a pic of that though.