Quick question about coil wires
Thread Starter
Launching!
Joined: Jul 2016
Posts: 286
Likes: 6
Quick question about coil wires Hey guys, I need to get a set of "make 'em yourself" plug wires for my swap, since my coils aren't going to be sitting on the valve covers as they do in the stock setup. Are the 'coil-side connectors' the same between all three types of coils, or do I need to specify a specific type?? (I'm using the "square-ish" truck coils, for whatever it's worth...)
And if I do have to order a specific type, is anyone able to recommend a specific PN that will work for this type of coil??
Thanks in advance guys.
And if I do have to order a specific type, is anyone able to recommend a specific PN that will work for this type of coil??
Thanks in advance guys.
Here are the MSD parts to make your own wires. You will either need the crimping die, or MSD plug wire pliers. I recommend the pliers...
MSD wire 34013
MSD straight Boots 3304
MSD 45 Degree boots 3301
T,
MSD wire 34013
MSD straight Boots 3304
MSD 45 Degree boots 3301
T,
Thread Starter
Launching!
Joined: Jul 2016
Posts: 286
Likes: 6
I was pretty confident that someone here would be able to steer me in the right direction! 
