Lose signal to Tac module.
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I recently did a 5.3 swap in my 86 c10. The motor has a DBW throttle body. Since I leave the truck in my shop across town and still afraid of it catching fire for some strange reason I disconnect the battery. But when I go to crank the motor after everything works fine. It only when I shut it off then start it again that it loses the signal to the tac module. I clear the code with a code reader and it works just fine. I have a keyed 12v source to the pink wire that powers the module so I’m not sure what’s up. Any information is more than welcome and much appreciated.