TCC switch wiring
Thread Starter
Teching In
Joined: Jun 2025
Posts: 6
Likes: 0
TCC switch wiring I have 96 Camaro Z28 , I swapped engine L77 engine using E38 ECM .
In the ECM x1 pin 9 Brake Switch Signal and in brake pedal switch there’s blue connector with 4 wires , 2 pink 1 green 1 blue .
Any wire tape with pin 9 ?
Is it just connecting the wire to the pin 9 , or is there a circuit that needs to be done?
In the ECM x1 pin 9 Brake Switch Signal and in brake pedal switch there’s blue connector with 4 wires , 2 pink 1 green 1 blue .
Any wire tape with pin 9 ?
Is it just connecting the wire to the pin 9 , or is there a circuit that needs to be done?
Last edited by iHani; Jul 23, 2025 at 09:06 AM.
TECH Fanatic
Joined: Dec 2017
Posts: 1,467
Likes: 265
From: Bossier City, Louisiana
Would a TCC brake switch help you to correctly corral your brake wires? See below:
https://www.psiconversion.com/cgi-bi...50&REFERERURL=
Rick
https://www.psiconversion.com/cgi-bi...50&REFERERURL=
Rick
