Wiring questions, just real simple.
Thread Starter
Staging Lane
Joined: Feb 2005
Posts: 61
Likes: 0
Wiring questions, just real simple. Howdy everyone,
I'm swapping a 6 liter into my cutlass, and have almost all the wiring figured out, but was noticing the injectors have pink wires run to the bulkhead connector in groups of two. I was wondering what ampperage I should run through those wires, and should I keep them in groups of two, or is it ok to run them all into one point?
Thanks
Tim
I'm swapping a 6 liter into my cutlass, and have almost all the wiring figured out, but was noticing the injectors have pink wires run to the bulkhead connector in groups of two. I was wondering what ampperage I should run through those wires, and should I keep them in groups of two, or is it ok to run them all into one point?
Thanks
Tim
TECH Resident
Joined: Oct 2004
Posts: 800
Likes: 1
From: Simi VAlley,CA
The factory runs two 15a circuits to supply power to the injectors, I suppose you could hook them all together but if anything shorts out you are totally dead. By using two fused power circuits they have at least allowed a bit of "limp home" protection to the injectors.
