4L60e/LS1 harness Wiring Question
Thread Starter
Joined: Mar 2005
Posts: 1,038
Likes: 3
From: Fort Wayne, Indiana
4L60e/LS1 harness Wiring Question Okay, I have a plug on my transmission harness that was broken on the pull... can anyone identify what these go to? From what I can tell, it seems to be brake signal for the TCC, and... well other wires... help anyone? 
The wires are: Purple/White, Pink, Tan/White, Black; they are -not- the rear O2 sensor wires, as those are just to the right in the picture, along with the VSS. The primary transmission connector is all there as well.
Any help would be excellent... I thought I had my harness completed when I found these suckers hiding...
The wires are: Purple/White, Pink, Tan/White, Black; they are -not- the rear O2 sensor wires, as those are just to the right in the picture, along with the VSS. The primary transmission connector is all there as well.
Any help would be excellent... I thought I had my harness completed when I found these suckers hiding...
Joined: Nov 2001
Posts: 1,707
Likes: 33
From: Anderson, Indiana
You may say they aren't rear O2 wires......but they -ARE-!
__________________
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
Thread Starter
Joined: Mar 2005
Posts: 1,038
Likes: 3
From: Fort Wayne, Indiana
LOL, so they put both sets in one side of the harness...
It's a good thing I don't mind looking like an ***... I seem to be good at it.
Thanks alot John and Jones'n, I appreciate the help.
Here's one for ya.
It's a good thing I don't mind looking like an ***... I seem to be good at it.
Thanks alot John and Jones'n, I appreciate the help.
Here's one for ya.
Thread Starter
Joined: Mar 2005
Posts: 1,038
Likes: 3
From: Fort Wayne, Indiana
Originally Posted by ducaT
Get the wiring diagrams from the Mitchell repair manuals at the local library.
Then you can track down the wires/sensors from the pinouts and the wire colors.
Then you can track down the wires/sensors from the pinouts and the wire colors.
