drivetrain help.
drivetrain help. o k guys heres my question. my cluch wont disingauge. i can start it in gear and it will drive but the cluch wont disingauge anytime? now ive bled the system for a week straight and it wont do a dam thing. what i and my machanic have noticed is the slave working but the cluch presure plate doesnt move? i have a spec stage 3 is there something im missin ? or should i get a new cluch. its the yellow stage 3 also have a zo6 slave brand new and a new master ???? im stumped? 
If you can't get it to go in to any gear. I would lean twards the clutch being bad. a freind said to me if its just not going into one gear, its the trans but if it wont go into all, its the clutch. he has rebuilt a few and said nothing would stop all gears at the same time.
TECH Regular
Joined: Jul 2004
Posts: 419
Likes: 0
could it be that you need to shim the slave closer to the motor to disengage the clutch properly?
or are you using improper technique to bleed the clutch hydraulics?
maybe you need an adjustable master to gain travel?
good luck man.
or are you using improper technique to bleed the clutch hydraulics?
maybe you need an adjustable master to gain travel?
good luck man.
