How well does truck intake flow?
Thread Starter
On The Tree
Joined: Oct 2002
Posts: 194
Likes: 0
From: Tampa, Florida
How well does truck intake flow? I know the truck intake won't clear the cowls on the F-body's, but on my LS1 hybrid I do have room. Does anybody have any eng dyno #'s or flow #'s. From what I understand,they don't flow as much as the LS6 intake, but it might be worth it if I could pick up some useable torque. Any thoughts?
TECH Enthusiast
Joined: Feb 2002
Posts: 540
Likes: 0
From: Native Texan
Re: How well does truck intake flow? The truck intake flows better than the 97-99 LS1 intake but less than the LS6/00-02 intake. I have these flow numbers that I copied off of another LS1Tech person a while back. These flow numbers are for a set of ported LS1 heads with each type of intake manifold attached. Hope this helps.
Later,
Bart
LS1 Intake
.200 .300 .350 .400 .450 .500 .550 .600
141- 185- 205- 222- 232- 241- 251- 258
Truck Intake
.200 .300 .350 .400 .450 .500 .550 .600
163- 206 -224 -237 -249 -262 -265 -270
LS6/00-02 Intake
.200 .300 .350 .400 .450 .500 .550 .600
166 -211 -229 -244 -257 -269 -277 -283
<small>[ November 10, 2002, 09:04 AM: Message edited by: Speedfreaks101 ]</small>
Later,
Bart
LS1 Intake
.200 .300 .350 .400 .450 .500 .550 .600
141- 185- 205- 222- 232- 241- 251- 258
Truck Intake
.200 .300 .350 .400 .450 .500 .550 .600
163- 206 -224 -237 -249 -262 -265 -270
LS6/00-02 Intake
.200 .300 .350 .400 .450 .500 .550 .600
166 -211 -229 -244 -257 -269 -277 -283
<small>[ November 10, 2002, 09:04 AM: Message edited by: Speedfreaks101 ]</small>
