LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Conversions & Swaps
Drive Shaft Yoke

Conversions & Swaps LSX Engines in Non-LSX Vehicles

Sponsored by:

Drive Shaft Yoke

Reply Subscribe

Search this Thread

Old

Jan 30, 2006 | 11:02 PM

#1

Thread Starter

TECH Fanatic

iTrader: (13)

Joined: Dec 2004

Posts: 1,458

Likes: 6

From: Olivehurst, CA

Default

Drive Shaft Yoke

I am looking at the Drive shaft yoke from my donor TransAm and it has a metal ring around it that looks like a small balancer. I have a 4L60E Transmission. I plan to use the drive shaft, after some shortening, that I had in the car plugged into a Turbo 350. The splines of the yokes are the same, in fact I am using the T350 yoke as a plug in the 4L60E right now to keep fluid in while I move the motor in and out. Can I use my T350 yoke or does the 4L60E need the specific yoke with the "balance" ring?

Would this be a better question for the transmission forum?

thanks

Pat

Old

Jan 31, 2006 | 07:48 AM

#2

TECH Enthusiast

iTrader: (6)

Joined: Feb 2005

Posts: 716

Likes: 2

From: Minneapolis MN

Default

It should work. I am going to reuse my th350 27 spline yoke for my T56.

Old

Jan 31, 2006 | 10:21 AM

#3

TECH Resident

Joined: Oct 2004

Posts: 800

Likes: 1

From: Simi VAlley,CA

Default

The 4L60 doesn't really need that dampener, it was just to "tune out" some specific harmonics.

Old

Jan 31, 2006 | 07:44 PM

#4

Thread Starter

TECH Fanatic

iTrader: (13)

Joined: Dec 2004

Posts: 1,458

Likes: 6

From: Olivehurst, CA

Default

Thanks guys. I will use my old drive shaft and yoke and hold the LS1 unit in reserve just in case.

Pat

Reply Subscribe

1953, 4l60, balancer, drive, driveshaft, ls1, ls1tech, pontiac, shaft, yoke

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 01:54 AM.