Steve68's Camaro.
#29
TECH Fanatic
iTrader: (23)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow, someone posted to this, it's turning into a model build, fronts done, worked on the pedals and gas pedal, and clutch bracket, master cylinder and did the tilt column with a MoMo wheel, right now it's just little stuff, have the motor and trans for mock up purposes, slowly but shurly, Thanks on the color!
#34
TECH Fanatic
iTrader: (23)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](http://i1191.photobucket.com/albums/z461/Steve6869/DSC00850.jpg)
This is a pick from when I got the quarters and tailpanel along with the rest of the body in primer, thats a rust free door from CA, with a new UPS style lines added!
Throw up a little update:
well oldest daughters in middle school, paid off the daily driver car, family truckster 2003 Envoy sits, not a very economical for in town driving, so more money to spend.
Front End: DSE coil over mounts welded in place, along with a firewall close out welded in, waiting on the A/C compressor for frame fit check, then paint!!!
Rear End: Prodigy Customs "G-Link" rear end kit, 4 link, adjustable, with Afco double adjustable shocks. narrowed to 50 or close to inches. ordered from Prodigy! AT this time, the cars getting a DSE mini tub kit, ones removed the other is in work,
Brakes: C5 front and rears with C5 master and booster, Wilwood prop valve,
interior/dash: Covans Classic dash panel with Autometer Ultra lights, MOMO wheel on a 68 Tilt column, Spearco Torino II seats, Vintage Air kit any day now.
Engine: 2002 LSX building, stock bottom end with ARP fasteners, stud kit and rod bolts, stock pistons, MLS head gaskets, Dart Pro 205's MTI X-1 cam, LS6 intake and
ported T/B,
THE very LAST set of ATS stepped tri-Y headers coated in black Jet Hot.
the engine package should put down some good numbers,
Wheels: Fikse Pro Fil 13's in Techno finish, (R)18x12 and (F)18x8 Michelin PS1 335/30/18 and 245/40/18 Awsome wheels from Prodigy Customs!!!
I'm sure there's more but, it now time to get into the garage for some action, it nice here no 80's with no HUMIDITY!!! perfect car working weather!! Have a Shutterfly account so I'll post up some pics later when I'm sitting here again,
Last edited by Steve68; 01-06-2011 at 08:52 PM.
#40
TECH Fanatic
iTrader: (23)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
[IMG]
[/IMG]
Here's a rear end shot, this set up "HAD" DSE Mini Tub springs, shocks. Took it all off and sold it, has 4 gen camaro brakes, Ford big bearing ends, 3:89 rear gear, The rear is apart getting ready to shorten it up to around 50" more to come,
Been working on posting pics, gathering them off the external HD, the new computer, last 2 computers were hit by lightining, the camera, and iphone,
Using Photobucket is easier, so I've been loading them into a folder there, still have to het them off the camera and iphone, and disk!!! unorganized!!!!
![](http://i1191.photobucket.com/albums/z461/Steve6869/IMG_1007.jpg)
Here's a rear end shot, this set up "HAD" DSE Mini Tub springs, shocks. Took it all off and sold it, has 4 gen camaro brakes, Ford big bearing ends, 3:89 rear gear, The rear is apart getting ready to shorten it up to around 50" more to come,
Been working on posting pics, gathering them off the external HD, the new computer, last 2 computers were hit by lightining, the camera, and iphone,
Using Photobucket is easier, so I've been loading them into a folder there, still have to het them off the camera and iphone, and disk!!! unorganized!!!!
Last edited by Steve68; 10-27-2010 at 05:57 PM.