trans-dapt swap kit...

Reply Subscribe

Thread Tools

Search this Thread

Sep 4, 2006 | 09:28 PM

bygblok

Thread Starter

Launching!

iTrader: (4)

Joined: Jul 2006

Posts: 249

Likes: 2

From: pensacola fl

trans-dapt swap kit...

has anyone used the trans-dapt pn 4592 kit to do an LS swap yet? I saw it in several different spots but haven't seen any reviews yet. Ding an LS sawp into my 92 camaro and it seemed like a decent kit since it comes with plates and mounts. Thanks, Bill

Sep 5, 2006 | 06:37 PM

1badjimmy

Staging Lane

iTrader: (4)

Joined: Apr 2006

Posts: 95

Likes: 0

From: outside San Antonio

I used the trans-dapt kit to swap in the LS motor into my second gen Jimmy and would like to have been able to move the engine a little farther back. Other than that no problems with them. Had two mounting holes on the engine plates to set motor lower if need be and used the lowest hole that they had. Hope it helps.

Sep 5, 2006 | 07:54 PM

bygblok

Thread Starter

Launching!

iTrader: (4)

Joined: Jul 2006

Posts: 249

Likes: 2

From: pensacola fl

thanks for the info. I'll have to see how low the motor will go in my third-gen I guess. I'm going to give TD and e-mail about the part and see that they recommend. Thanks again, Bill

Jun 6, 2011 | 01:21 AM

_blake

Staging Lane

Joined: May 2011

Posts: 69

Likes: 0

Quote:

Originally Posted by bygblok

thanks for the info. I'll have to see how low the motor will go in my third-gen I guess. I'm going to give TD and e-mail about the part and see that they recommend. Thanks again, Bill

Hey how did this work out??? I'm putting an LS1/T56 in my 89 camaro. I am not running heat or AC.