Need some help with LS2 starter
11-21-2006, 12:51 AM
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Clifton NJ
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Need some help with LS2 starter I ran into some problems with the starter I got from GM. The LS starter I have has a pigtail on it to run the solenoid instead of the studs that are usually on starters. The pt# is 89017847, I was trying to see what vehicle this is from but have had no luck. I need to know so I can see if I can locate the pigtail or I'm gonna have to get another starter and suck up the loss 
Please let me know. Thanks in advance.
Please let me know. Thanks in advance. 
11-22-2006, 12:25 AM
#2
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Clifton NJ
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Wow! Nobody has seen this type of starter? I tried to call up a few vendors too and they haven't heard of it. Hmmm, very strange. I'm gonna really have to look into this. If anybody finds something please let me know. Thanks. 
11-23-2006, 12:08 AM
#4
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Clifton NJ
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure how to really wire this and the connector for the pigtail is really skinny. I could try and see if I could wire it but I would be better off returning it and getting an fbody one. I found out that the starter I have is for a 2006 LS2/LS7 Corvette, so I guess they are now wiring the starter solenoid with pigtails.
