Throttle Cable Question
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Nor Cal
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a wilson 90 degree elbow and a 105 mm accufab TB. Which cables have you guys been using? The elbow points the TB forward and the rotation of the butterfly moves it forward not back towards the firewall.
Thanks.
Thanks.
#3
Teching In
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Nor Cal
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The car is a 72 camaro
No pictures as of yet. It is an accufab 90mm mono. With this tb mounted on a wilson elbow bolted to the wilson manifold, the tb faces forward towards the radiator. This puts the linkage on the passenger side of the motor and thus the butterfly has to tilt towards the radiator toopen not towards the firewall as in most applications.
Thanks.
No pictures as of yet. It is an accufab 90mm mono. With this tb mounted on a wilson elbow bolted to the wilson manifold, the tb faces forward towards the radiator. This puts the linkage on the passenger side of the motor and thus the butterfly has to tilt towards the radiator toopen not towards the firewall as in most applications.
Thanks.