Quick walkaround of our Miata
Thread Starter
Teching In
Joined: May 2006
Posts: 34
Likes: 0
Quick walkaround of our LS1 Miata Last edited by v8mazda351; Feb 4, 2007 at 09:30 PM.
Originally Posted by v8mazda351
Sweet. What rear axle is that?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
Teching In
Joined: May 2006
Posts: 34
Likes: 0
pretty good, you have to put a small 1/4" dent to clear one of the bellhousing bolts. You can pull the tranny in car, but unfortunatly, you can't pull the bellhousing off in car. Not unless you wanted to drill holes in the firewall so the bolt will come out far enough.
Originally Posted by v8mazda351
pretty good, you have to put a small 1/4" dent to clear one of the bellhousing bolts. You can pull the tranny in car, but unfortunatly, you can't pull the bellhousing off in car. Not unless you wanted to drill holes in the firewall so the bolt will come out far enough.
