Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Carb Ls1 Nitrous Combos

Thread Tools
 
Search this Thread
 
Old 04-23-2007, 01:02 PM
  #1  
Staging Lane
Thread Starter
iTrader: (3)
 
94ls1bird's Avatar
 
Join Date: Jul 2002
Location: lewisville
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts

Default Carb Ls1 Nitrous Combos

I searched but nothing comes up. I wanna know of any fast carb nitous ls1 combos around, and what they are running if so.
Old 04-23-2007, 10:02 PM
  #2  
FormerVendor
iTrader: (5)
 
hpmotorsports's Avatar
 
Join Date: Jun 2006
Location: N.E. FL
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
Default

mine is a 5.3,but it is carbed & nos, runs 11.2 on 100 hp shot
Old 04-24-2007, 09:23 AM
  #3  
Launching!
iTrader: (4)
 
bygblok's Avatar
 
Join Date: Jul 2006
Location: pensacola fl
Posts: 249
Received 2 Likes on 1 Post

Default

TJ(stage 20) went into the 6's(1/8) last year pretty hard with a 6.0, cam only and some spray. He went 7.0 Saturday on motor only with the same setup, a little more gear than last year. I hope to see 6.90's with my 346 with a 150 shot when all's said and done. We both have 3rd gen camaro's on carbs with th350's through 9" rears.
Old 04-24-2007, 08:34 PM
  #4  
9 Second Club
iTrader: (119)
 
PRAY HRD's Avatar
 
Join Date: Aug 2003
Location: CISSNA PARK, IL
Posts: 2,972
Likes: 0
Received 1 Like on 1 Post

Default

good topic. not to hijack, but i assume you can't run n2o using the edelbrock controller, correct??
Old 04-24-2007, 09:42 PM
  #5  
TECH Junkie
iTrader: (18)
 
LS1MCSS's Avatar
 
Join Date: Jan 2006
Location: Dover, Arkansas
Posts: 3,831
Likes: 0
Received 8 Likes on 7 Posts

Default

Originally Posted by PRAY HRD
good topic. not to hijack, but i assume you can't run n2o using the edelbrock controller, correct??
I would think you could . Can't you program the Edelbrock box to retard the timing when you want it to?
Old 04-24-2007, 10:12 PM
  #6  
9 Second Club
iTrader: (119)
 
PRAY HRD's Avatar
 
Join Date: Aug 2003
Location: CISSNA PARK, IL
Posts: 2,972
Likes: 0
Received 1 Like on 1 Post

Default

no, there's just chips and Edelbrock.....get this.......says they don't know what the timing or vaccuum setup is for each chip?!?!?!
Old 04-25-2007, 07:13 AM
  #7  
Launching!
iTrader: (4)
 
bygblok's Avatar
 
Join Date: Jul 2006
Location: pensacola fl
Posts: 249
Received 2 Likes on 1 Post

Default

the setup I have has had a 150 hit put through it with no apparent problems. He just wanted to spray it harder so he went with a Victor Jr. I have the older setup with chips.
Old 04-25-2007, 09:16 AM
  #8  
9 Second Club
iTrader: (119)
 
PRAY HRD's Avatar
 
Join Date: Aug 2003
Location: CISSNA PARK, IL
Posts: 2,972
Likes: 0
Received 1 Like on 1 Post

Default

you've got the edelbrock & a 150 shot???? what do you have for motor work if you don't mind?
Old 04-25-2007, 11:07 AM
  #9  
Launching!
iTrader: (4)
 
bygblok's Avatar
 
Join Date: Jul 2006
Location: pensacola fl
Posts: 249
Received 2 Likes on 1 Post

Default

hasn't been hit on my motor yet but was used on another one and ran very well. I'd have to find out from him what all was used at that time. He's done a swap or two since this was last used. I'm pretty sure TJ's car had a dual-plane on it as well and was spraying 150 on a stock bottom-end LQ4 with a cam and running into the 6's(1/8 mile) I just wanna get mine together before the season ends!



Quick Reply: Carb Ls1 Nitrous Combos



All times are GMT -5. The time now is 04:22 PM.