Headers For 79 T/A?
07-23-2007, 08:18 AM
#2
Launching!
iTrader: (1)
Join Date: Jul 2006
Location: Montgomery, IL
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of FLP headers from a 01 f-body and a set of pacesetter headers w/o emission tubes from a 98-02 f-body. Both fit with some modifications. I am selling the FLP headers. If you are interested, they are in Montgomery, IL and you can see them installed on a 78 trans am.
07-24-2007, 12:10 AM
#3
Staging Lane
Join Date: Mar 2007
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Edelbrock makes a set of Stainless headers with slip fit collectors. They are recommended for 2nd gen F-bodies. The tubes clear and you can angle the collectors to line up with the pipes. Summit sells them for $409. p/n EDL-65703.
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
08-02-2007, 08:21 PM
#4
TECH Fanatic
iTrader: (16)
Join Date: Dec 2004
Location: Jefferson, Ga
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by shovelhead73
Edelbrock makes a set of Stainless headers with slip fit collectors. They are recommended for 2nd gen F-bodies. The tubes clear and you can angle the collectors to line up with the pipes. Summit sells them for $409. p/n EDL-65703.
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
08-03-2007, 09:15 AM
#5
Staging Lane
Join Date: Apr 2003
Location: Manitoba
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
I am using 4th gen dynatech drag race headers. Slip on collectors. The drivers side collector pointed right into the frame so I had a friend cut it and
weld about a 30 degree bend on it. Now they fit fine.
weld about a 30 degree bend on it. Now they fit fine.
