460le trans park position question

Reply Subscribe

Thread Tools

Search this Thread

Dec 20, 2007 | 03:35 PM

rockytopper

Thread Starter

TECH Resident

Joined: Nov 2007

Posts: 816

Likes: 0

From: Texas

460le trans park position question

does the 460le need to have 12v going to it inorder to put it into park? I'm asking this because I bought a pullout engine combo still on the pallet and when I manually turn the shifter input shaft on the trans I am one click short of having enough dentents. Is this because park is locked out due to not be wired up? I'm trying to reuse my column shift and need to have it in park when I adjust and align mechanism.

Dec 20, 2007 | 03:44 PM

camrs73

Teching In

Joined: Apr 2006

Posts: 29

Likes: 0

From: ct

try turning the output shaft a little while trying to put it into park. you might be in between detents preventing the parking pawl from engaging

Dec 20, 2007 | 03:45 PM

G-Body

sawzall wielding director

iTrader: (4)

Joined: Sep 2004

Posts: 3,148

Likes: 12

From: Downers Grove, IL

No, the 4l60e should shift into all gears (including park) without any power. You should be able to grab the shifter shaft and go through P R N OD D 2 1

Dec 21, 2007 | 12:21 PM

lsxyj

Launching!

iTrader: (1)

Joined: Dec 2007

Posts: 200

Likes: 0

From: clovis nm

u may just need to try a LITTLE harder to go into park

Dec 22, 2007 | 10:49 AM

rockytopper

Thread Starter

TECH Resident

Joined: Nov 2007

Posts: 816

Likes: 0

From: Texas

thanks guys, it took both turning the shaft and trying a LITTLE harder. see's locking now and clicking in all 6. Appreciate the knowledge.
Thanks again

Reply Subscribe